Rattle Can Guns? Let's see em!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Surveyor1653

Sharpshooter
Special Hen
Joined
Nov 21, 2008
Messages
2,017
Reaction score
18
Location
Looking for the lumens
i983.photobucket.com_albums_ae320_promiseofwars_photo1_zps9f3ae93a.jpg
[/URL]
Revised. Told ya "to be continued."

This has a fairly "Rhodesian" feel to it. I like it.
 

SeanO

Sharpshooter
Special Hen
Joined
Jan 1, 2014
Messages
678
Reaction score
0
Location
Tulsa
SeanO, I like that beyond belief. I want to do one of my rifles like that. You're in Tulsa? I'm in Bartlesville...


If I bring a 12-pack of beer, would that be sufficient to kill the time needed to do it?

Seriously. What will it take to make this happen? Maybe even one in the darker green shades and one in lighter sandy-colored shades.

Just saw this sorry. Yours came out good! If you want some help with another shoot me a PM I can drive out to you.... Beer is cool with me!
 

24T_missilejock

Sharpshooter
Special Hen
Joined
Oct 4, 2013
Messages
279
Reaction score
0
Location
OKC
ok i see the pattern now , as usual i was looking at the negative and not the positive . i'm not good on my trees, but i can see where you used a group of leaves from possibly some variety of elm ?. actually looks good what are the colors you used .

elance

It's pot man! Cheeba! Weed! Smoke! Ganja! Merry ja wonna! Sticky Ikky! Chronic! Purple Cush! Mota! LOL
 

tRidiot

Perpetually dissatisfied
Special Hen
Joined
Oct 23, 2009
Messages
19,523
Reaction score
12,712
Location
Bartlesville
Just saw this sorry. Yours came out good! If you want some help with another shoot me a PM I can drive out to you.... Beer is cool with me!

No problem, man. I think it was just getting over the initial thought of painting one of my guns! lol Now I'm ready to do another! However I don't want to do it until I get it "complete", ya know? As in, I'm not going to make anymore changes. And the only other all-black ones I have are my son's 15-22 and my 6.8SPCII. I don't think he wants his camo, and mine has the plastic handguards and a FSP... I've been thinking of losing both of those.

Nice job.

What will you be doing differently next time?

Well, the black undercoat I did was unnecessary, first of all, but I wanted an even basecoat underneath. I think next time I'll do the basecoat as the light tan, then go over it with the dark brown and green. Most of the patterns on mine that seemed to pop more were the ones I did where went back over the tan with the green and a stencil... so I think I'll skip a couple steps.

Here's what I did. All paints were flat camo Krylon from Wal-Mart:

1. Remove charging handle and BCG, tape trigger, close port door.
2. Spray liberally with dregreaser - 3 times! lol
3. Basecoat of flat black. Dry 15 minutes.
4. Few diagonal random stripes of green. Few stenciled green with mulberry.
5. Repeat #4 with dark brown.
6. Repeat #4 with light brown.

Then to add-on:

7. Added more areas of light brown, then stenciled over them with crosshatched and stenciled dark green.


So basically, if I skip 3,4 & 5, I can start with solid light brown and stencil the darker colors over that. That is what seemed to look best, it seems to me. The dark green over black is barely noticeable from a distance. And the dark brown over black and dark green is barely even noticeable up close. So I think the light undercolor will help more than a black base.


And if it looks like shite, I just acetone it and start over, right?



Actually, the most nerve-wracking part of it for me was the optic. I know it isn't fancy, but I spent like $175 on it, plus another $20 in the Butler Creek flip-ups. So I was worried about the knobs getting gummy or something like that. But I haven't tried it yet. I'll have to wait and see. On my 6.8 I was considering putting a cheap Buckmark I have on there to paint... but it's got low-low rings and I figure the FSP will obscure it, so I'ma need to get some higher rings or a mount first.
 

120 Acres

Sharpshooter
Special Hen
Joined
Sep 23, 2013
Messages
5,903
Reaction score
74
Location
Long
Thanks T.

I did an old single shot .20ga this past weekend. Not too happy with it, but its kinda cool for what it is, I will have to get some pics up.
 

NikatKimber

Sharpshooter
Staff Member
Special Hen Moderator
Joined
Jan 2, 2006
Messages
20,771
Reaction score
1,492
Location
Claremore
No problem, man. I think it was just getting over the initial thought of painting one of my guns! lol Now I'm ready to do another! However I don't want to do it until I get it "complete", ya know? As in, I'm not going to make anymore changes. And the only other all-black ones I have are my son's 15-22 and my 6.8SPCII. I don't think he wants his camo, and mine has the plastic handguards and a FSP... I've been thinking of losing both of those.



Well, the black undercoat I did was unnecessary, first of all, but I wanted an even basecoat underneath. I think next time I'll do the basecoat as the light tan, then go over it with the dark brown and green. Most of the patterns on mine that seemed to pop more were the ones I did where went back over the tan with the green and a stencil... so I think I'll skip a couple steps.

Here's what I did. All paints were flat camo Krylon from Wal-Mart:

1. Remove charging handle and BCG, tape trigger, close port door.
2. Spray liberally with dregreaser - 3 times! lol
3. Basecoat of flat black. Dry 15 minutes.
4. Few diagonal random stripes of green. Few stenciled green with mulberry.
5. Repeat #4 with dark brown.
6. Repeat #4 with light brown.

Then to add-on:

7. Added more areas of light brown, then stenciled over them with crosshatched and stenciled dark green.


So basically, if I skip 3,4 & 5, I can start with solid light brown and stencil the darker colors over that. That is what seemed to look best, it seems to me. The dark green over black is barely noticeable from a distance. And the dark brown over black and dark green is barely even noticeable up close. So I think the light undercolor will help more than a black base.


And if it looks like shite, I just acetone it and start over, right?



Actually, the most nerve-wracking part of it for me was the optic. I know it isn't fancy, but I spent like $175 on it, plus another $20 in the Butler Creek flip-ups. So I was worried about the knobs getting gummy or something like that. But I haven't tried it yet. I'll have to wait and see. On my 6.8 I was considering putting a cheap Buckmark I have on there to paint... but it's got low-low rings and I figure the FSP will obscure it, so I'ma need to get some higher rings or a mount first.

I'm going to do my AR eventually. I'm going to use the tan as the base coat. My furniture; stock, grip, handguard; are all FDE, and I've already painted the SS barrel black. So just have to paint the upper/lower and barrel, then start applying the camo colors.
 

Latest posts

Top Bottom