I have a real challenge. A broken Glenfield 75 stock.

[Catt57]

This will be interesting..

Let's see if I can put this one back together...





.

 

[O4L]

Ouch!

 

[Catt57]

Step 1. Glue it together.

 

[RickN]

Heres hoping!

 

[dennishoddy]

Step 1. Glue it together.

View attachment 160537

Ok! We have the same issue! I have a glenfield 75 with a cracked stock in the same area. It's a nail hanger rifle in the barn for varmints and such. I did put some elmers in there at one time. It was a $35 rifle bought when Gibsons closed and sold on clearance. Its actually a very accurate shooter in real life. Recently took it off the nail and did the annual cleaning and oiling even though a single shot had not been fired through it in the year previous. It just gathers dust, and It might be a fun project to actually repair the crack so it doesn't show so much.

 

[Catt57]

Ok! We have the same issue! I have a glenfield 75 with a cracked stock in the same area. It's a nail hanger rifle in the barn for varmints and such. I did put some elmers in there at one time. It was a $35 rifle bought when Gibsons closed and sold on clearance. Its actually a very accurate shooter in real life. Recently took it off the nail and did the annual cleaning and oiling even though a single shot had not been fired through it in the year previous. It just gathers dust, and It might be a fun project to actually repair the crack so it doesn't show so much.

Did you see this one I fixed a few years ago? The stock was cracked but not yet broken in half like this one.

https://www.okshooters.com/threads/just-found-another-project-glenfield-75.218762/

 

[crrcboatz]

Needs a couple of pins counter sunk and filled too

 

[Catt57]

Needs a couple of pins counter sunk and filled too

I plan to drill pilot holes and run some brass screws across the breaks. Then clip the screw heads and sand them smooth with the stock.

 

[Catt57]

Heres hoping!

Oh by the way, it was missing the inner magazine tube also. Remember those ones I got from you? The small one is a perfect fit and it cycles perfectly by hand.

Thanks!

 

[dennishoddy]

Did you see this one I fixed a few years ago? The stock was cracked but not yet broken in half like this one.

https://www.okshooters.com/threads/just-found-another-project-glenfield-75.218762/

I did. My stock is cracked but not totally broken. Like I said, I put a little elmers glue on it, put it in a vise and clamped it until the glue dried.
The fun part of this would be to lose the crack line and maybe refinish it like I did a Model 10 Win shotgun. Make it more into a walnut vs birch look?
I'm looking for projects! lol