Yes, the carb is new. The old one did the same so I hoped it was bad and the new carb would fix the issue. It is my first time working on one with the electronic solenoid. So far I'm not a fan. 
I cut the tip off many of those solenoids and stuck them back in and instant startup and run.
I am not a fan either.
There really is not much to those small carbs.
If you do not have any fuel in the new carb you could have a stuck needle..Sometimes after a rebuild the needle will sit in the seat and get stuck this will happen if the rebuilt carb sits for a long time on the shelf with needle in the seat waiting to be sold.
When I build a carb I put a tiny bit of Quicksilver marine 2 stroke oil on the needle.
It does not dry up and get sticky and will not harm rubber.
I also use it to lube valve stems when I build cylinder heads.
Friend has a couple nice riding mowers that quit on him just 2 weeks ago.
One does not have a deck under it and he uses it for pulling stuff around his acreage.
He said i could have the one with the mower deck if I needed it.
I did not need it. But I felt compelled to fix it for him.
It was a failed fuel shut off solenoid and gooey crud in the bottom of the carburetor.
Runs great now. and took less than 30 minutes to have it running.
He was happy.
Steering was very stiff on it..I lubed up the pivot joints and it got much smoother.
He said his wife hated it because it was hard to steer. Not hard to steer now.
I am not a fan either.
There really is not much to those small carbs.
If you do not have any fuel in the new carb you could have a stuck needle..Sometimes after a rebuild the needle will sit in the seat and get stuck this will happen if the rebuilt carb sits for a long time on the shelf with needle in the seat waiting to be sold.
When I build a carb I put a tiny bit of Quicksilver marine 2 stroke oil on the needle.
It does not dry up and get sticky and will not harm rubber.
I also use it to lube valve stems when I build cylinder heads.
Friend has a couple nice riding mowers that quit on him just 2 weeks ago.
One does not have a deck under it and he uses it for pulling stuff around his acreage.
He said i could have the one with the mower deck if I needed it.
I did not need it. But I felt compelled to fix it for him.
It was a failed fuel shut off solenoid and gooey crud in the bottom of the carburetor.
Runs great now. and took less than 30 minutes to have it running.
He was happy.
Steering was very stiff on it..I lubed up the pivot joints and it got much smoother.
He said his wife hated it because it was hard to steer. Not hard to steer now.
Last edited:
Have you checked to see if the solenoid wire is getting power and is connected?
Pull the fuel float bowl and see if the float is stuck
No, a carbs can be completely gummed up and as long as you do not block the air intake it will run on starter fluid.
No, a carbs can be completely gummed up and as long as you do not block the air intake it will run on starter fluid.
Swampratt for the win. In my defense I plugged the carb wire in the old plug thinking it still had power. A mouse must have got to it because it had no power. I put it directly on positive side of battery and it works. Now I get to do a little rewiring. I will win this battle.
Turns out the new engine was bad. Oil getting in the intake and the governor messed up as well. Thankfully they stood behind it and I sent it back today.
Similar threads
- Sale Price: 999$
