Trigger Question for PCC's

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thor447

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Sep 1, 2012
Messages
4,794
Reaction score
11,496
Location
Newcastle
I'm planning on making one of my 17D lowers into a PCC. Having never put a PCC together before, in what little reading I've done thus far I've come across more than one person talking about issues with weaker hammer springs from drop in triggers causing issues in the PCC. More and more, I'm reading about people taking mil-spec triggers and possible only updating the trigger spring, while keeping the original hammer spring. Does anyone here have any experience with aftermarket triggers in their PCC's (going with Glock build with the ramped bolt). Any info or insight would be appreciated.
 

Rez Exelon

Sharpshooter
Special Hen
Joined
Jan 10, 2009
Messages
3,485
Reaction score
3,347
Location
Tulsa
I'm planning on making one of my 17D lowers into a PCC. Having never put a PCC together before, in what little reading I've done thus far I've come across more than one person talking about issues with weaker hammer springs from drop in triggers causing issues in the PCC. More and more, I'm reading about people taking mil-spec triggers and possible only updating the trigger spring, while keeping the original hammer spring. Does anyone here have any experience with aftermarket triggers in their PCC's (going with Glock build with the ramped bolt). Any info or insight would be appreciated.
I'm running a PCC with a RA-140 and it's just fine. BTW, if you're looking at turning on into a PCC style, I can send you a parts list to make it a super de-duper ambi setup too. The biggest thing to be is that instead of doing a magwell adapter, use the EndoMags instead.
 

Shadowrider

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Jan 28, 2008
Messages
21,505
Reaction score
9,294
Location
Tornado Alley
I can tell you that the Geissele I tried to use made a damn fine and cool looking single shot AR.

I know JP's will work, Hyperfire are reported to work and I think Rise Armament will too. But I went mil-spec with the JP springs and a bobbed hammer to make it work properly.
 

chadh2o

Gunslinger
Supporting Member
Special Hen Supporter
Joined
Dec 31, 2015
Messages
604
Reaction score
663
Location
Norman
I'm running a PCC with a RA-140 and it's just fine. BTW, if you're looking at turning on into a PCC style, I can send you a parts list to make it a super de-duper ambi setup too. The biggest thing to be is that instead of doing a magwell adapter, use the EndoMags instead.
If u dont mind, put me on the list. X2 on the PCC for one of the 17.
 

Latest posts

Top Bottom