What to do with bad reloads

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aries

Sharpshooter
Special Hen
Joined
Feb 1, 2019
Messages
5,538
Reaction score
8,098
Location
Sapulpa
I appreciate the info. I did not know they could be pushed in. If Fyrtwuck does not take them I will get one of the
primer seater tools. I have about 80 that need to be done.
If you go that route, this is about as cheap as you can get one... Lee products are not as good quality as RCBS but they cost a lot less and will work just fine for many years (IMO).

https://www.amazon.com/LEE-PRECISIO...s=lee+hand+priming+tool&qid=1617974450&sr=8-1

And you'll need a shell holder like this, I didn't shop around and you may very well find one a little cheaper somewhere else. Usually they're just a couple of bucks unless they've gone way up since I last bought one.

https://www.amazon.com/LEE-PRECISIO...c29e6&pd_rd_wg=JtKWD&pd_rd_i=B000N8LFYY&psc=1
 

xjer

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Aug 18, 2005
Messages
347
Reaction score
48
Location
OKC
If you go that route, this is about as cheap as you can get one... Lee products are not as good quality as RCBS but they cost a lot less and will work just fine for many years (IMO).

https://www.amazon.com/LEE-PRECISIO...s=lee+hand+priming+tool&qid=1617974450&sr=8-1

And you'll need a shell holder like this, I didn't shop around and you may very well find one a little cheaper somewhere else. Usually they're just a couple of bucks unless they've gone way up since I last bought one.

https://www.amazon.com/LEE-PRECISIO...c29e6&pd_rd_wg=JtKWD&pd_rd_i=B000N8LFYY&psc=1

Great. I had started looking for what I would need. That helps a a lot.
 

Aries

Sharpshooter
Special Hen
Joined
Feb 1, 2019
Messages
5,538
Reaction score
8,098
Location
Sapulpa
You're more than welcome. I didn't look around much, so it's possible you'll find a little better deal especially if you have to consider shipping from Amazon. Especially on the shell holder, that looks a little expensive to me but I just wanted to show what you need. Then again, it's been several years since I've bought any.
 

Rayce

Sharpshooter
Special Hen
Joined
Jul 24, 2009
Messages
118
Reaction score
20
Location
Enid, OK
If you are not in a big hurry, I can fix them for you. I have the tools.
My friend works downtown. So he could shuttle the cargo if you are interested.
 

xjer

Sharpshooter
Supporting Member
Special Hen Supporter
Joined
Aug 18, 2005
Messages
347
Reaction score
48
Location
OKC
If you are not in a big hurry, I can fix them for you. I have the tools.
My friend works downtown. So he could shuttle the cargo if you are interested.

I am picking a gun up tomorrow and he is going to fix them, I appreciate the offer.
 

Latest posts

Top Bottom