Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Chard" data-source="post: 2170739" data-attributes="member: 2454"><p>This is so true. The extractor is a stamped part (unlike the Volquartsen which is edm'd) and sometimes they simply are not right. Keeping extractor groove clean helps alot on a 10/22's. If running a tight target chamber and extracting unfired rounds, a good edm'd extractor helps alot. I normally don't change out extractors unless they become problematic or I have a OOB and the extractor is loss. The 10/22 will function without and extractor being a blowback, just not real consistantly tho.</p></blockquote><p></p>