Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="KurtM" data-source="post: 3012732" data-attributes="member: 6064"><p>Polish the feed ramp? Meh, if it has some real deep tooling marks maybe, but most all problems in this area are far better addressed by quality magazines, and maybe an "elevated" magazine catch. That is one machined with the flat surface that actually holds the magazine in the gun about .040" higher. Most troubles I see are due to poor location of the mag catch hole and or a sloppy QA on the machining of the catch it's self</p></blockquote><p></p>