Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="dennishoddy" data-source="post: 4137917" data-attributes="member: 5412"><p>Stuck cases are easily removed by drilling and tapping a 1/4 X 20 thread into what was the primer pocket, then using a long bolt along with an over sized nut with the center hole bigger than the case and the proper sized nut on top of that with a washer. Use a long bolt and it pulls it out every time. Pulled I don't know how many stuck cases from mine and other folks dies with this method.</p></blockquote><p></p>