Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="swampratt" data-source="post: 4138798" data-attributes="member: 15054">Thanks for the post on this.I drilled and tapped the case for 1/4- 20 and inserted some all thread and stacked washers with big holes in them onto the die and then placed a few fender washers over the large hole washers and then a 1/4-20 nut on top of the fender washers and tightened the nut.Did not work at first so i warmed the die and added candle wax around the stuck case and put grease between 2 fender washers so they would rotate better.Pulled right out.Mandrel was then stuck in the neck of the case so worked that over and got it apart.Die survived as did the mandrel and decapper.</blockquote>