308 Brass once fired Remington, Winchester, Federal and Hornady

[tran]

I have a guy wanting to buy all the brass I have I just don't know what to charge so I am asking for your thoughts. The brass is fully Processed (Primer Reamed, Flash hole re worked, Trimmed to same length, De-burred and Chamfered) I have 500 to a 1000 rounds of each ready to load

I sold my 308 and no longer need it...

 

[swampratt]

See the problem i have with what you have done to the brass is this.
You worked the brass to your liking..someone with a different gun may want a different trim length..
a different die will work the brass differently...You removed the primer and possibly cleaned the brass.

Essentially you have removed any marks that will be good to have for sorting into different lots.

The chamfer you put on the brass may be excessive to some people...
As some deburr after trimming with 0000 steel wool instead of a reamer...

Get as much as you can for the worked over brass or whatever makes you and him happy.

I do not buy cleaned brass if i can help it much less worked over brass.
I ended up with worked over crap too many times...
Not saying yours is crap ..but just saying..

 

[tran]

The brass is sold I just asking what to charge him. I don't want to over charge or undercharge for the brass. The brass is good to go.

 

[swampratt]

I knew it was sold...about 20 per 100 rounds would be good.
do not know what you got..today's prices seem much higher though