Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="gl89aw" data-source="post: 860749" data-attributes="member: 7257"><p>I finally figured out that when reloading with lead bullets that if you don't have a 4 die set with a taper crimp die that you can accomplish almost the same thing with a 3 die set by first running them thru the seat/crimp die with it backed off a wee bit to seat the bullet but not crimp, You can then run the die down and run them thru again for crimping or eliminating the bell. Its kinda a pain to have the adjust it twice but it keeps from shaving the lead and screwing up the head space.</p></blockquote><p></p>