Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Rifle & Shotgun Discussion
6.5 Grendel build
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="TacticalJ" data-source="post: 1413963" data-attributes="member: 10620"><p>Ok, got all the problems worked out and here it goes. First off let me say that my shop is a mess with the home renovations on shop renovations that are currently ongoing, so I don't want to hear anything about it as I get enough on that from the wife! I laid out all my parts for the build and took a picture of them, as follows.</p><p>[ATTACH=full]84427[/ATTACH]</p><p></p><p>Then I chuck the upper reciever into the upper action block. This assembly is placed in the vise and secured.</p><p>[ATTACH=full]84428[/ATTACH]</p><p></p><p>Then it's on to the important stuff, first I put the barrel in the upper receiver.</p><p>[ATTACH=full]84429[/ATTACH]</p><p></p><p>Installed the barrel nut.</p><p>[ATTACH=full]84430[/ATTACH]</p><p>[ATTACH=full]84431[/ATTACH]</p><p></p><p>Then the barrel nut was tightened up with a strap wrench, which worked perfectly by the way. No it is probably not "torqued" properly and I may have to find the correct barrel nut wrench to work with this nut, but it served a purpose here today and is very secure. </p><p>[ATTACH=full]84432[/ATTACH]</p><p></p><p>Now I'm going to break this up into 2 different posts, for the sake of pictures! So far, so good and feel free to give your feedback or ideas. Thanks</p></blockquote><p></p>
[QUOTE="TacticalJ, post: 1413963, member: 10620"] Ok, got all the problems worked out and here it goes. First off let me say that my shop is a mess with the home renovations on shop renovations that are currently ongoing, so I don't want to hear anything about it as I get enough on that from the wife! I laid out all my parts for the build and took a picture of them, as follows. [attach=full]84427[/attach] Then I chuck the upper reciever into the upper action block. This assembly is placed in the vise and secured. [attach=full]84428[/attach] Then it's on to the important stuff, first I put the barrel in the upper receiver. [attach=full]84429[/attach] Installed the barrel nut. [attach=full]84430[/attach] [attach=full]84431[/attach] Then the barrel nut was tightened up with a strap wrench, which worked perfectly by the way. No it is probably not "torqued" properly and I may have to find the correct barrel nut wrench to work with this nut, but it served a purpose here today and is very secure. [attach=full]84432[/attach] Now I'm going to break this up into 2 different posts, for the sake of pictures! So far, so good and feel free to give your feedback or ideas. Thanks [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Rifle & Shotgun Discussion
6.5 Grendel build
Search titles only
By:
Top
Bottom