Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="glowworm" data-source="post: 2896941" data-attributes="member: 38537"><p>FYI, I've done this as well.  It is a good idea to use some anti-galling goop on the threads of the setscrew.  You don't want the aluminum and steel to gall/stick if you ever need to take the set screw out.  I also did this on the safety detent so I could pull the grip without losing that spring.  For those wary...if you really dork up the threads...so what.  Just put the full size spring in and cover it up with the end plate.  You won't really ruin it.  You'll just prevent yourself from doing the mod.  Lube the tap too...</p></blockquote><p></p>