-
If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.
You can become a Supporting Member
Sadly the Ace is four blocks away and your place is about 43 miles, I think I end up cheaper than 5 gallons of fuel most of the time... But if I was closer.
HA I figured you were not my neighbor.
I have needed an odd size bolt before and took a regular sized one and ground the threads off and took my tap and die set and threaded it to what I needed.
That is bad I know..I have also welded 2 together to make a longer one..Yes I cut the head off of one of them.
Stripped a head bolt hole in the block in a 350 oldsmobile..old rusty! I just tapped it for larger fine thread bolt and drilled the head hole larger.
Grip screw problem could be solved by tapping it to a more standard size maybe something you have laying around.
This is when you absolutely do not have other choices though.
Yea I will jack some stuff up to make it work
I have needed an odd size bolt before and took a regular sized one and ground the threads off and took my tap and die set and threaded it to what I needed.
That is bad I know..I have also welded 2 together to make a longer one..Yes I cut the head off of one of them.
Stripped a head bolt hole in the block in a 350 oldsmobile..old rusty! I just tapped it for larger fine thread bolt and drilled the head hole larger.
Grip screw problem could be solved by tapping it to a more standard size maybe something you have laying around.
This is when you absolutely do not have other choices though.
Yea I will jack some stuff up to make it work
Similar threads
- Sub Category: Rifles
- Sale Price: 1200$
- Caliber: 6.5mm
