Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Blown Primers going from Fed 210M to Rem 7 1/2?
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="rockchalk06" data-source="post: 4011424" data-attributes="member: 40794"><p>Couple other things to note.</p><p></p><p>1. Depriming all 8 cases, primers were still super tight. Very noticeable amount of force to remove primer v's my large rifle load.</p><p></p><p>2. Priming the 8 cases felt no different than when I originally primed them. Very stiff and tight.</p><p></p><p>3. I measured headspace off a new virgin piece of brass from the same lot as these fired 8. I did not mess with headspace on the initial loading. Just adjusted the necks and loaded them. All 8 measured no more than .005" increase with 6 of 8 being .004" Only two were .005" and they were NOT the blown primer cases. Those measured .004".</p></blockquote><p></p>
[QUOTE="rockchalk06, post: 4011424, member: 40794"] Couple other things to note. 1. Depriming all 8 cases, primers were still super tight. Very noticeable amount of force to remove primer v's my large rifle load. 2. Priming the 8 cases felt no different than when I originally primed them. Very stiff and tight. 3. I measured headspace off a new virgin piece of brass from the same lot as these fired 8. I did not mess with headspace on the initial loading. Just adjusted the necks and loaded them. All 8 measured no more than .005" increase with 6 of 8 being .004" Only two were .005" and they were NOT the blown primer cases. Those measured .004". [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Blown Primers going from Fed 210M to Rem 7 1/2?
Search titles only
By:
Top
Bottom