Reply to Thread

Message

<blockquote data-quote="swampratt" data-source="post: 3659203" data-attributes="member: 15054">Mine is the hand held case neck turner but I do not hold my case by hand.I use a Lee lock stud and the shell holder to hold my brass.I use the Lee case length gauge and Lee cutter&nbsp; to trim all cases the same length before neck turning.Look here at the Lee things I mention.[URL unfurl=&quot;true&quot;]https://www.midwayusa.com/product/1012835597[/URL]I tried using the hand held case holder but that took FOREVER.I tried a Lee case cutter/chamfer tool that mounts to the press and you turn a handle.I could not get .001&quot; accuracy with that like I can the Lee case length gauge setup.If you have another way to hold the case and turn it and feed it slowly into the RCBS neck turner that would work also.I already had all the Lee stuff because I trim cases and that is how I trim them.</blockquote>

[QUOTE="swampratt, post: 3659203, member: 15054"] Mine is the hand held case neck turner but I do not hold my case by hand. I use a Lee lock stud and the shell holder to hold my brass. I use the Lee case length gauge and Lee cutter to trim all cases the same length before neck turning. Look here at the Lee things I mention. [URL unfurl="true"]https://www.midwayusa.com/product/1012835597[/URL] I tried using the hand held case holder but that took FOREVER. I tried a Lee case cutter/chamfer tool that mounts to the press and you turn a handle. I could not get .001" accuracy with that like I can the Lee case length gauge setup. If you have another way to hold the case and turn it and feed it slowly into the RCBS neck turner that would work also. I already had all the Lee stuff because I trim cases and that is how I trim them. [/QUOTE]

Verification