Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Blitzfike" data-source="post: 1432026" data-attributes="member: 807"><p>I got the info from technitium-99. He has been using this for a while with great success. It approximates the dillon spray lube. I mixed about two ounces of liquid lanolin which I got from the local health food store at I-240 and Penn, (Less than $7.00 for a 4 ounce bottle) with a spray bottle (from Big-Lots ) full of 97% Isopropol Alcohol from Wal-Mart. I had been hand lubing the cases before dumping them in my Dillon casefeeder, and Mitch at J&K Bullet Casters uses the dillon lube before dumping cases in his case feeder. The lube I normally use is Imperial Sizing Die wax, and I have way less stuck cases with it than anything else I have used. So far this mix is working fine for me, I haven't tried it with 30-06 cases yet, but if it works on them, it will work on anything. I place the cases in a flat container and spray with the mixture as I roll and shake them to distribute the lube. It dries very quickly and leaves the case with enough lube to resize with little effort. I'll keep you updated on any issues I find with it. Blitzfike</p></blockquote><p></p>