Reply to Thread

Message

<blockquote data-quote="NikatKimber" data-source="post: 809493" data-attributes="member: 423">Ok, here&#039;s visual results.These are all bullets that I cast Sunday, out of a Lee TL 158gr SWC mold.Sized to .358, and lubed with LLA. 25rds, 10 yds, standing, unsupported, single action.[Broken External Image]Same as previous, but lubed a second time. 25rds, 10 yds (didn&#039;t appear to be sufficient lube on the grooves of the bullets) [Broken External Image]Same as previous, but re-sized to .358 to remove excess lube. 25rds, 10 yds[Broken External Image]Same bullets as previous, but rested on a small table when shooting. 10 rds, 10yds.[Broken External Image]I&#039;m happy with these. Best I can tell, most of the spread is operator error. And yes, I know I need to adjust the sights, but I didn&#039;t want to change anything else during the test.</blockquote>

[QUOTE="NikatKimber, post: 809493, member: 423"] Ok, here's visual results. These are all bullets that I cast Sunday, out of a Lee TL 158gr SWC mold. Sized to .358, and lubed with LLA. 25rds, 10 yds, standing, unsupported, single action. [b][Broken External Image][/b] Same as previous, but lubed a second time. 25rds, 10 yds (didn't appear to be sufficient lube on the grooves of the bullets) [b][Broken External Image][/b] Same as previous, but re-sized to .358 to remove excess lube. 25rds, 10 yds [b][Broken External Image][/b] Same bullets as previous, but rested on a small table when shooting. 10 rds, 10yds. [b][Broken External Image][/b] I'm happy with these. Best I can tell, most of the spread is operator error. And yes, I know I need to adjust the sights, but I didn't want to change anything else during the test. [/QUOTE]

Verification