Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="bpshooter" data-source="post: 4234925" data-attributes="member: 46420"><p>Get a casting thermometer they're not expensive from roto metals etc. I never cast over 800 perfect temp in my opinion between 725 and 750. I keep a cheap hot plate warm my molds up on it then pour 10-12 sets of bullets and let them solidify and dump them back in i don't even look at them. After those rounds I'll pour water quench a 100 or so usually have no issues. Just my experience take it for what its worth. As far as your issue with flashing as others have said loose grip on mold or something holding seam open.</p></blockquote><p></p>