Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="WhiteyMacD" data-source="post: 1366804" data-attributes="member: 7633">I heavily disagree with this.   Anything more than 1.5-2" and you are creating bad CV angles.  Maybe this isnt an issue for 98s and up, but it is a issue with 88-98s. Beyond that, you need to really make sure your mark your bars so you can tell you have cranked each side equally.And I would vehemently disagree with buying new ones then cranking them.  If you are going to buy new ones, just get heavy duty bars.  That alone will give you at least 2" of lift (Look at a 88-98 3/4ton vs 1/2 ton 2wd)...</blockquote>