Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Blitzfike" data-source="post: 950077" data-attributes="member: 807"><p>I have both a chrony and a pact. I haven't had the pact long enough to really wring it out, so my opinion on that will come later. I do like the remote skyscreens as I have shot the lense off of one of the photocells on my chrony.. I use the chronograph in load development. I use a lot of surplus powders and have found that the information given with them is sometimes not even close. By starting low and chronographing the loads, looking at pressure signs on the primer and measuring the case expansion at the web area, I can work up loads that are safe in my particular guns. It is a very necessary tool for the type load experimentation that I do. One project involved working up a rifle load in .40sw caliber for a beretta carbine that my son shoots. By combining hard cast swc coated with a wax/moly lube, I was able to get about 300 fps better velocity consistently without increased pressure signs, over what factory pistol ammo would deliver in the long barrel. I used a surplus version of AA#7 to get there. slower burning powder, better lube and careful analysis of what was happening made it work.  Blitz</p></blockquote><p></p>