Reply to Thread

Message

<blockquote data-quote="druryj" data-source="post: 3325126" data-attributes="member: 10465">Excellent info and much appreciated.&nbsp; [USER=15253]@mightymouse[/USER] was letting everyone shoot his scoped CZ 452 with the RWS at the last ENS on Feb 2nd.&nbsp; I liked that round for sure, in his rifle.&nbsp; I want to try some of the ones you have suggested in mine now.Thanks! I had read about using the Ace Spring #144, or the Fastenal Spring #160.&nbsp; And you aren&#039;t the first one to warn me off the Mr. Fly either!&nbsp; Also, have read about removing the washer and/or the nut on the trigger rod.&nbsp; I have left everything stock so far, just adjusted the trigger nut down to the lowest position on the trigger rod, but might give the spring/washer/nut combo a try just for grins.&nbsp; I&#039;m pretty happy with the trigger as it is right now, but I do like to tinker some.&nbsp; I have an ACE nearby, I may drive over there tomorrow and grab up the #144 spring out.&nbsp; Can&#039;t be more than a buck or two, and it won&#039;t take me long to swap it out and check anyway.</blockquote>

[QUOTE="druryj, post: 3325126, member: 10465"] Excellent info and much appreciated. [USER=15253]@mightymouse[/USER] was letting everyone shoot his scoped CZ 452 with the RWS at the last ENS on Feb 2nd. I liked that round for sure, in his rifle. I want to try some of the ones you have suggested in mine now. Thanks! I had read about using the Ace Spring #144, or the Fastenal Spring #160. And you aren't the first one to warn me off the Mr. Fly either! Also, have read about removing the washer and/or the nut on the trigger rod. I have left everything stock so far, just adjusted the trigger nut down to the lowest position on the trigger rod, but might give the spring/washer/nut combo a try just for grins. I'm pretty happy with the trigger as it is right now, but I do like to tinker some. I have an ACE nearby, I may drive over there tomorrow and grab up the #144 spring out. Can't be more than a buck or two, and it won't take me long to swap it out and check anyway. [/QUOTE]

Verification