Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Bubber" data-source="post: 1076616" data-attributes="member: 5490"><p>Blutch, You can and if you are using them in an auto there should be no large problem.  In a Revo it may make a slight difference if the action has beeen lightened.  if they are not deformed I usually pull the bullet, (with an inertial bullet puller) and add powder and bullet again without depriming.  But if you need to resize you can either pull out the decapping pin and resize the cases and load on the SBD.  That way you don't go through all the motions just to dump the powder as it is a auto indexing machine.  Just my thoughts.  Later rdd</p></blockquote><p></p>