Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Rustygun" data-source="post: 3512678" data-attributes="member: 4711">I have rebuilt and repaired two old neglected 650’s.  The problems you describe are easily fixable. I currently run a 650 just for 9mm, and a 550 for everything else I reload.powder problems are either from a jerking during the indexing of the shell plate or you are using the wrong probe on the powder cop device.  priming station issues are almost always fixed by fine tuning and adjustments.  Bring it over to my shop and we will have it cranking out ammo in a hour.</blockquote>