Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="TerryMiller" data-source="post: 3170734" data-attributes="member: 7900"><p>Since the "nut" is rectangular rather than square, one might be able to use a 12-point socket, but it would have to be big enough to fit the 4 corners that are in the rectangle.  The problem with 12-point sockets is that their "points" are shallow, and with a metal such as this fixture appears to be, they might just slip off and round the corners.  I'd consider a pipe wrench in a vice with the wrench jaws up.  However, that might be unhandy for working with the other "wrenching" device.</p></blockquote><p></p>