Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Buck98" data-source="post: 4378561" data-attributes="member: 51795"><p>I’ll dig out the feeler gauge in the shop tomorrow but for now I cut a small strip of paper and placed it between the forcing cone and cylinder. I closed the cylinder and the paper would slide back and forth then I opened the cylinder and rotated to the next chamber, closed the cylinder and the paper slid back and forth, repeated the process for the other 4 cylinders and there is one cylinder that the paper won’t slide easily. You have grip the paper tightly to pull it out.</p></blockquote><p></p>