Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="camcow2002" data-source="post: 2377694" data-attributes="member: 5478"><p>I just started reloading, with the basic LNL setup. I've had problems keeping the powder measure right , but I think I've got that fixed, but now I'm getting crushing on some cases. I'm using lead bullets from J&K with a lee taper crimp seating combination die, could the die be my culprit or something else. If so ie there a good seating die that isn't free floating (I've already fond lead and grease buildup can be a shrinking factor on the rounds).</p></blockquote><p></p>