Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="hipshot" data-source="post: 2111363" data-attributes="member: 8034">Dang, I could help you out here in The Tulsa area, don't know anyone there though? Does the locking bolt and latch not line up with the holes in the jamb?  Try opening the door and then picking up on the lock side and see if the hinges move any at all. If they do just remove 1 screw at a time and replace with longer ones (4" ones are best). If the door is solid and doesn't move then you will probably have to ream out the holes in the jamb with a grinder bit or dremel tool. If you have any questions you can call\Text me at 918-695-3808</blockquote>