Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="chazroh" data-source="post: 3855194" data-attributes="member: 7288"><p>Granted, I started with once fired brass, but did anneal it, trim, chamfer, debur, de crimp it. The brass was full length sized in the groups above, I wiped the brass off yesterday, neck sized them, ( I even did the swamp rat q-tip neck wipe) loaded the 42 gr loads again today. The groups opened up a bit. The only thing I changed was the way I sized the brass.</p></blockquote><p></p>