Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Jcann" data-source="post: 3855197" data-attributes="member: 33119"><p>I would pay attention to my brass prep. Starting off with annealing, shoulder and neck prep. Both groups are shooting 5 o’clock with some flyers (I don’t like the 2 o’clock flyers in the 42gr group). Although these could be cold bore issues but only you would know that. Your ES of 105 for 41.5gr will look like a shotgun at distance but all of them are basically at 5 o’clock. Work up another load with this powder weight paying attention to brass prep, powder charge, and bullet seating depth. If the group stays the same but your ES/SD drop drastically in value and you’re happy with the MV, try another load this time only adjusting bullet seating depth.</p></blockquote><p></p>