Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Ians 17/22" data-source="post: 3984252" data-attributes="member: 51816"><p>You sure have a fun project , how's the bearings , i always used Kroil in the 1st step of removing & loosening rust.....scraping only if it's warped otherwise emery cloth should do it , then cross hatch using a file ground on the front with a radious & a rake....just scrape X's all over the bed & compound then brush on some Way Lube . might even use STP , now everything floats on a bed of oil.....very smooth.....STEVE</p></blockquote><p></p>