If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.

You can become a Supporting Member

Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="rocketman" data-source="post: 4379876" data-attributes="member: 24956">K98k Waa63 (Mauser factory) barrel. This was sporterized at some point with holes drilled and tapped for hunting sights and file marks for silver solder. The muzzle was damaged and I cut 1/8" or so off and recrowned it then tried to reblue after removing silver solder. This has pipe wrench marks. The bore is bright and shiny with some pitting in the grooves. Most flaws will be hidden if rebuild as a K98. Could make a decent hunting rifle as well $20Yugo? 8mm barrel possible from an M24 or M48. Its shorter than the K98 barrel. There is a hole in the threads where the receiver was drilled but it shouldn't affect anything. Bright bore. $10</blockquote>