If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.

You can become a Supporting Member

Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Ahall" data-source="post: 3883814" data-attributes="member: 49426">When it comes to metal lathes, if you can handle moving a larger secondhand manual machine you can do quite well on the second-hand market.    The demand for 1 1/2 tons of manually controlled cast iron powered by a 3-phase motor is low at a good old-fashioned spit in the dirt auction.Little south bends and similar machines tend to bring a premium because they are easy to move and single phase.  Popularity, not capability drives up the price.  Unlike a table saw or other wood working machines, the part is more or less contained in the lathe, so its footprint is about all the space it takes up.  A bigger machine does not take up that much more space and will put a lot more chips in the pan at the end of the day.  The rigidity of the bigger machine also improves surface finishes and reduces tool chatter.You can find a lot of advice on moving, loading, and unloading.  Just think it through carefully and ask for help.  Its slow, but not that difficult.  Just work out loading before buying.The other trick is the 3 phase power.  Under 3 hp or so a variable frequency drive is an economical solution to go from single to 3 phase.  Above that it gets a bit more difficult.Tooling - try to buy it with the lathe.  Get the extra chucks, tool holders, centers, drill chucks, rests, etc.   As individual items on ebay you will spend more than the lathe.Be careful at the auctions.Know the market and understand how to evaluate anything you buy.Don't get competitive.  Set a price and walk away if it goes higher.You go hunting for a deal but pay more than anyone else will.</blockquote>

Verification