Reply to Thread

Message

<blockquote data-quote="Dumpstick" data-source="post: 3682627" data-attributes="member: 41653">Here&#039;s a pic of the kit that I bought.&nbsp; I don&#039;t know if I&#039;m even going to use it, but I have it.[ATTACH=full]237509[/ATTACH]The tank on the Minnie is 8 gallons or so, I purchased this kit - it claims up to 12.The components can be purchased separately: - The cleaner is just an alkali (base) degreaser, much the same as the ZEP brand I purchased at WalMart in the gallon jug.&nbsp; My tank was so nasty, that quart of cleaner would have never been enough.- The &quot;Rust Blast&quot; is a phosphoric acid solution, a &#039;rust converter&#039;, that can be purchased at any auto parts or paint supply store. It converts the rust to zinc phosphate. I have most of a quart bottle of some Jasco brand &#039;Prep &amp; Primer&#039; that I got at NAPA some years ago. I&#039;ll use that up first.- The sealer is a humidity-activated single-stage epoxy.&nbsp; Many companies make one - POR comes to mind.[ATTACH=full]237510[/ATTACH]Oh hell - it says &quot;For Professional Use Only&quot;.&nbsp;&nbsp; I can just imagine some Fed Alphabet agency busting down the door when the word gets out that I used it.</blockquote>

[QUOTE="Dumpstick, post: 3682627, member: 41653"] Here's a pic of the kit that I bought. I don't know if I'm even going to use it, but I have it. [ATTACH type="full"]237509[/ATTACH] The tank on the Minnie is 8 gallons or so, I purchased this kit - it claims up to 12. The components can be purchased separately: - The cleaner is just an alkali (base) degreaser, much the same as the ZEP brand I purchased at WalMart in the gallon jug. My tank was so nasty, that quart of cleaner would have never been enough. - The "Rust Blast" is a phosphoric acid solution, a 'rust converter', that can be purchased at any auto parts or paint supply store. It converts the rust to zinc phosphate. I have most of a quart bottle of some Jasco brand 'Prep & Primer' that I got at NAPA some years ago. I'll use that up first. - The sealer is a humidity-activated single-stage epoxy. Many companies make one - POR comes to mind. [ATTACH type="full"]237510[/ATTACH] Oh hell - it says "For Professional Use Only". I can just imagine some Fed Alphabet agency busting down the door when the word gets out that I used it. [/QUOTE]

Verification