Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="dennishoddy" data-source="post: 4084564" data-attributes="member: 5412">Put that vice on a 12” square 1/4-3/8” steel plate with a cripple on the outside edge back to the support leg to make it solid as heck.If you don’t, you will understand later when putting some serious torque on a project that needs rigidity.I have two of those 3.5” Wilton’s mounted on two different workbench’s for years now. Every commercial machine shop does the same.Make sure the back jaw is over the bench underneath so long pieces can be clamped vertically.</blockquote>