Reply to Thread

Message

<blockquote data-quote="swampratt" data-source="post: 3600731" data-attributes="member: 15054">Next up was Varget 42.6 gr powder and 168A-Max.First shot up was annealed before firing and I pulled a dry bore snake through the barrel 2 times.First 3 shots were .560&quot; center to center.4th shot I pulled due to a bug buzzed my ear just as&nbsp; the trigger was about to break.I quickly built a 5th round and it went high.Cool down time so I shot my .243.Case neck was&nbsp; sooty but a consistent sooty so I did not anneal any more.Case grew in length .006&quot; this time and is now 2.018&quot; AOLPrimer pockets were cleaned each time and my CCI 200 primers feel just the same when seating.Nice and firm seating pressure.Next up was the&nbsp; hunt load I use&nbsp; as it has been great all the time I shoot it.No more annealing and I did not clean the barrel any.155 A-Max 44.4 gr IMR 4064 CCI 200 .914&quot;&nbsp; center to center group No fliers.[ATTACH=full]211815[/ATTACH]</blockquote>

[QUOTE="swampratt, post: 3600731, member: 15054"] Next up was Varget 42.6 gr powder and 168A-Max. First shot up was annealed before firing and I pulled a dry bore snake through the barrel 2 times. First 3 shots were .560" center to center. 4th shot I pulled due to a bug buzzed my ear just as the trigger was about to break. I quickly built a 5th round and it went high. Cool down time so I shot my .243. Case neck was sooty but a consistent sooty so I did not anneal any more. Case grew in length .006" this time and is now 2.018" AOL Primer pockets were cleaned each time and my CCI 200 primers feel just the same when seating. Nice and firm seating pressure. Next up was the hunt load I use as it has been great all the time I shoot it. No more annealing and I did not clean the barrel any. 155 A-Max 44.4 gr IMR 4064 CCI 200 .914" center to center group No fliers. [ATTACH type="full"]211815[/ATTACH] [/QUOTE]

Verification