Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Range
Ammo & Reloading
Neck sizing and shooting
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="swampratt" data-source="post: 3606024" data-attributes="member: 15054"><p>Here are the first 5 shots today after trimming to 2.001"</p><p>I seated these about .050" deeper later on in the day and they shot with less vertical.</p><p>Different powder though.</p><p>[ATTACH=full]213416[/ATTACH]</p><p></p><p></p><p>I then went to the next load which was IMR 4064 I had 6 of the Hornady 168 A-Max bullets and 3 of the Tipped match king 168 bullets.</p><p>I used 2 different primers also the Federal 210M and the CCI 200.</p><p>Different seating depths for the 2 bullets also.</p><p>Not a bad 9 shot (Hunting) group considering what I did with the loads.</p><p></p><p>[ATTACH=full]213417[/ATTACH]</p><p></p><p></p><p>To the left of the center line are the 5 rounds with a Hornady #3031 150 gr bullets and BL-C(2) powder at 45.0 gr.</p><p>CCI 200 primers</p><p>At the end of those shots fired the case had grown to 2.011" OAL.</p><p></p><p>I did shoot it 3 more times and called it quits for the day. 168 TMK bullets and AA2495 powder No measurements on case length yet.</p><p></p><p>I have not annealed any during today's firing.</p></blockquote><p></p>
[QUOTE="swampratt, post: 3606024, member: 15054"] Here are the first 5 shots today after trimming to 2.001" I seated these about .050" deeper later on in the day and they shot with less vertical. Different powder though. [ATTACH type="full" alt="015.JPG"]213416[/ATTACH] I then went to the next load which was IMR 4064 I had 6 of the Hornady 168 A-Max bullets and 3 of the Tipped match king 168 bullets. I used 2 different primers also the Federal 210M and the CCI 200. Different seating depths for the 2 bullets also. Not a bad 9 shot (Hunting) group considering what I did with the loads. [ATTACH type="full" alt="014.JPG"]213417[/ATTACH] To the left of the center line are the 5 rounds with a Hornady #3031 150 gr bullets and BL-C(2) powder at 45.0 gr. CCI 200 primers At the end of those shots fired the case had grown to 2.011" OAL. I did shoot it 3 more times and called it quits for the day. 168 TMK bullets and AA2495 powder No measurements on case length yet. I have not annealed any during today's firing. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Range
Ammo & Reloading
Neck sizing and shooting
Search titles only
By:
Top
Bottom
