Reply to Thread

Message

<blockquote data-quote="thor447" data-source="post: 4158551" data-attributes="member: 24867">I have a variable speed polishing motor that I want to attach an adapter to that will help me with some watch case work.&nbsp; The arbor on the polishing machine is 8mm OD, with a flat for a set screw. The female end of the part I&#039;m needing to attach has a female ID of 14mm, and has a set screw.What I&#039;m trying to see if I can get made is a 8mm female to 14mm male adapter - each side of the adapter being 20-25mm long.&nbsp; Ideally, the 8mm female side would have a hole drilled and tapped so I can attached a set screw.&nbsp; The 14MM male side would have a flat machined on it so the set screw on my part can grab on and secure it.Does anyone here have a lathe &amp; mill that could do this work?&nbsp; I&#039;m ideally looking for the part in stainless steel, but I&#039;ll defer to your expertise.&nbsp; This would be spinning up to 4k RPM.&nbsp; Here&#039;s a couple of photos.&nbsp; If you are interested, I&#039;ll gladly pay for your parts and labor. [ATTACH=full]428249[/ATTACH][ATTACH=full]428250[/ATTACH]Feel free to reach out to me via text (405-517-1379) or PM.&nbsp; There is undoubtedly much more data you&#039;ll probably need in order to make the part, and I&#039;ll get you whatever measurements you require.&nbsp; I can also bring you the polishing motor and part if you want to do more measurements yourself.Thanks,Adam</blockquote>

[QUOTE="thor447, post: 4158551, member: 24867"] I have a variable speed polishing motor that I want to attach an adapter to that will help me with some watch case work. The arbor on the polishing machine is 8mm OD, with a flat for a set screw. The female end of the part I'm needing to attach has a female ID of 14mm, and has a set screw. What I'm trying to see if I can get made is a 8mm female to 14mm male adapter - each side of the adapter being 20-25mm long. Ideally, the 8mm female side would have a hole drilled and tapped so I can attached a set screw. The 14MM male side would have a flat machined on it so the set screw on my part can grab on and secure it. Does anyone here have a lathe & mill that could do this work? I'm ideally looking for the part in stainless steel, but I'll defer to your expertise. This would be spinning up to 4k RPM. Here's a couple of photos. If you are interested, I'll gladly pay for your parts and labor. [ATTACH type="full" alt="1699664494426.png"]428249[/ATTACH] [ATTACH type="full" alt="1699664515751.png"]428250[/ATTACH] Feel free to reach out to me via text (405-517-1379) or PM. There is undoubtedly much more data you'll probably need in order to make the part, and I'll get you whatever measurements you require. I can also bring you the polishing motor and part if you want to do more measurements yourself. Thanks, Adam [/QUOTE]

Verification