Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Blitzfike" data-source="post: 1727197" data-attributes="member: 807"><p>Another thought is if the die set was setting without use for several years, there may be some rust or corrosion on the inside of the dies. That will cause cases to stick continuously. Examine the inside with a strong light and if they are not brightly polished, that may be a lot of your problem. You don't want to use any abrasive or steel wool on the inside of the dies, a felt swab with some polishing media such as tin oxide or jewelers rouge and some elbow grease will restore the dies. I have recovered several sets that way. I chuck it in the lathe and slowly polish until bright. Blitzfike</p></blockquote><p></p>