Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="montesa" data-source="post: 4390523" data-attributes="member: 477"><p>If it were mine I would put two 90s on the stack to turn toward the back of the sink. With a reducer to 1.5".  Then turn up and put an aav up as high as possible under the sink back.  You could probably get away with pushing the PVC pieces together and silicone around the edges or use a rubber connection somewhere to make it easy to remove.  They might make a 90 with clean out opening.</p></blockquote><p></p>