Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="swampratt" data-source="post: 3338150" data-attributes="member: 15054">The crown looked decent except for the bottom which may be just the picture..Hard to get a good picture of a crown sometimes.I had best luck straight on looking at it and in the sunlight outside.But does not look so bad that it could not hold MOA at 100 once you find the load it likes.Unless there is a hickey at the bottom.Yea  13gr of Red Dot was too hot for my 30-06 and 170gr.Accuracy sucked. I kept reducing it until accuracy was good.I even shot a few different regular jacketed bullets with the 11.5 gr load of Red Dot they were 100 fps slower and not as accurate as the cast bullet.I used Lee Alox as a lube for the bullets then.I have not tried powder coated with that 30-06.</blockquote>