Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="TheLastDaze" data-source="post: 2583728" data-attributes="member: 10463">Reset my seating/crimping die and all is well.... I ran 125 rds through and all came out perfect...I had obviously to much crimp, surprising only a handful failed when the others came out fine.. I pulled all the bullets and retrieved my powder and the primer, I scraped the brass..just to see how much of the crimp I could get out I reran the brass through the sizer and it smoothed it out but on two you could faintly see where the crimp was...</blockquote>