Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="mgssamn" data-source="post: 3920015" data-attributes="member: 46421"><p>This may be just me. but I found using 91% alcohol content-  Isopropyl alcohol is superior for 3d beds versus the lesser 70%  content bottles.   I rarely have adhesion problems anymore.   really never did on pla, but on pteg is good always now.    If you are printing PLA with a heated bed and you arent sticking you dont have a clean bed or your printer head is too high likely.     Assuming you are using a smooth bed with pla.</p></blockquote><p></p>