Reply to Thread

Message

<blockquote data-quote="beardking" data-source="post: 3920103" data-attributes="member: 31421">Well, I tried the soapy water and that didn&#039;t seem to do the trick, so I tried the 91% alcohol and that didn&#039;t seem to do anything helpful either.&nbsp; I adjusted the bed temp from 60C to 65C and adjusted the Z offset to .04 and so far it seems to be adhering and printing.&nbsp; We&#039;ll see how well those changes work in about 5 hours.&nbsp;&nbsp; <img class="smilie smilie--emoji" loading="lazy" alt="😂" title="😂" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f602.png" />&nbsp; <img class="smilie smilie--emoji" loading="lazy" alt="😂" title="😂" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f602.png" /> As for the prints and setup, this is what I have so far: This was my first test print of the owl, minus the spaghetti farm that it produced when I wasn&#039;t looking[ATTACH=full]328484[/ATTACH]This is the skull snowflake I printed next (needs a bit more cleaneup:[ATTACH=full]328485[/ATTACH]And this is my temporary setup for the printer.&nbsp; I plan on putting it on it&#039;s own table after Christmas.&nbsp; I just have to get the Christmas tree out of it&#039;s future home first.&nbsp; [ATTACH=full]328486[/ATTACH]</blockquote>

[QUOTE="beardking, post: 3920103, member: 31421"] Well, I tried the soapy water and that didn't seem to do the trick, so I tried the 91% alcohol and that didn't seem to do anything helpful either. I adjusted the bed temp from 60C to 65C and adjusted the Z offset to .04 and so far it seems to be adhering and printing. We'll see how well those changes work in about 5 hours. 😂 😂 As for the prints and setup, this is what I have so far: This was my first test print of the owl, minus the spaghetti farm that it produced when I wasn't looking[ATTACH type="full"]328484[/ATTACH] This is the skull snowflake I printed next (needs a bit more cleaneup: [ATTACH type="full"]328485[/ATTACH] And this is my temporary setup for the printer. I plan on putting it on it's own table after Christmas. I just have to get the Christmas tree out of it's future home first. [ATTACH type="full"]328486[/ATTACH] [/QUOTE]

Verification