Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Classifieds
Media
New media
New comments
Search media
Log in
Register
What's New?
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More Options
Advertise with us
Contact Us
Close Menu
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Forums
The Water Cooler
Photo Album
Random stuff you have made
Search titles only
By:
Reply to Thread
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Jason Freeland" data-source="post: 4187942" data-attributes="member: 45827"><p>Let me think, by the time I'm done with the drawers, it should be just shy of 80 hours. Normally this printer screams through projects, but this one had such a high structural strength need that it took longer than normal. The longest prints were the back two segments of it which were 17 hours a piece. Fortunately this machine is pretty set it and forget it, you don't have to baby it much. I can also check it and correct some things by phone from anywhere there is a signal. The most common error is when retracting the filament during a material change, it can get stuck. Usually just telling it to retry will fix it and that can be done remotely.</p></blockquote><p></p>
[QUOTE="Jason Freeland, post: 4187942, member: 45827"] Let me think, by the time I'm done with the drawers, it should be just shy of 80 hours. Normally this printer screams through projects, but this one had such a high structural strength need that it took longer than normal. The longest prints were the back two segments of it which were 17 hours a piece. Fortunately this machine is pretty set it and forget it, you don't have to baby it much. I can also check it and correct some things by phone from anywhere there is a signal. The most common error is when retracting the filament during a material change, it can get stuck. Usually just telling it to retry will fix it and that can be done remotely. [/QUOTE]
Insert Quotes…
Verification
Post Reply
Forums
The Water Cooler
Photo Album
Random stuff you have made
Search titles only
By:
Top
Bottom