Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Rustygun" data-source="post: 3702122" data-attributes="member: 4711"><p>I have a 550 and an old 650 that I rebuilt in my garage.  The 650 is used primarily for 9mm.  I have very little problem with the primer feed system on the 650.  I think there has been 2 primers miss fed in the last 5000 reloads.  one of those could have been me putting the primer in upside down.   A few things I don’t like are you have to manually advance the rotor 6-8 slots to get the first primer positioned right.  After the low primer alert goes off you can load another 13 rounds before you run out of primers.</p></blockquote><p></p>