Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="NightShade" data-source="post: 3179311" data-attributes="member: 29706"><p>Personal preference.  I have all lee dies and they have worked well.  I use an RCBS primer pocket swage tool.  Lee RAM prime.  Lee quick trim dies for length and a K&M neck turner for the converted 300blk brass.  If you have lee presses you will likely have to use their holder system though.  The ones that have the clamp system are really nice if you never want the die to shift or move with the single stage presses.  But the regular ones are a bit cheaper and with a little over tightening of the o-ring part they are nearly solid.</p></blockquote><p></p>