Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Glocktogo" data-source="post: 2637652" data-attributes="member: 1132">Solo 1000 is nearly identical, but it tends to be inconsistent from lot to lot. I ran a guy through a low light shoot house using Solo 1000 under a 147gr out of a CZ-75 and you could barely even see a bit of really dull orange at the end of the muzzle. It was so noticeably lower in flash than everyone else, that I had to ask him what he was running.Vit N320 is another good powder, but pricey. I just haven't found anything with the combination of clean burning, soft recoil and low temp that matches WST.That barrel you linked doesn't mention polygonal rifling. They usually use it as a selling point if it is, so I'd bet it's not. That means you should be good using plated bullets. You might also consider polymer coated bullets. I just ran 150 through my 9mm 1911 after work today. I've never had my bore clean up as quickly and easily. I ran a few passes with a brush soaked in Hoppes #9, then two dry patches. The third patch was nearly spotless and there was zero fouling left in the grooves. Oh yeah... <img src="/images/smilies/smile.png"  class="smilie" loading="lazy" alt=":)" title="Smile    :)" data-shortname=":)" /></blockquote>