Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Cowcatcher" data-source="post: 4179898" data-attributes="member: 43171"><p>What was on that list will not help you get those parts turned into a functioning press. I don’t know what you paid for it……..I’m gonna be real honest with you…….if it was more than about $100 you are probably going to have near new price in it by the time you get all the missing stuff. Now that we have that out of the way. Being as you don’t know much about what you need my suggestion for you would be to call Dillon and schedule sending it to them. I’ve never sent one to them but I’ve heard they’ll replace all missing pieces pretty much making it new. I’m sure they can give you an estimate. I pieced together and worked over several Dillons and if I were closer to you I’d help you. In my educated guessing opinion you’re gonna need about $300 to get it ready to accept dies and make ammo. You’re missing, 2 primer slides, atleast 1 primer mag tube, 2 primer pickup tubes and a powder measurer with 2 charge bars, 2 toolhead pins and atleast 1 toolhead. It looks like you do have one Shellplate in the press. The buttons are gone but those will come with caliber conversions. Man this isn’t what I expected you to get from a $50k collection.</p></blockquote><p></p>