If you have bought, sold or gained information from our Classifieds, please donate to OKShooters Association and give back.

You can become a Supporting Member

Reply to Thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Cryhavoc33" data-source="post: 4306301" data-attributes="member: 52071"><p>Here's what happened to my m&p 45. Luckily the brush-hog didn't get it but the back tire did and it forcibly popped the slide off and broke the rear dovetail section which I was unable to find off in the process. It broke off right behind the rear pins and seems mostly undamaged other than the missing dovetail at the rear of the frame, and the slide having a small chipped section, the backplate needing replace, and the rear site being pushed out of place so I've been wondering if it's repairable by somehow rebuilding that back section with some type of polymer or jb weld, because it seems possible. But I'm hesitant because I'm not sure how it would hold up and don't really want the missing area I rebuild with some kind of material that I am able to sculpt, or jb weld to replace the snapped off section of the frame at the rear blowing out on me.</p></blockquote><p></p>